J2607A Technical Specifications
HP 10 Base Transceiver Module
J2607A
HP Transceiver
HP EtherTwist 10Mbps 10Base-T Copper Mode
Twisted-Pair RJ-45 Connector
Transceiver Module.
J2607A – HP EtherTwist 10Mbps 10Base-T Copper Mode Twisted-Pair RJ-45 Connector Transceiver Module.
J2607A
HP Transceiver
HP EtherTwist 10Mbps 10Base-T Copper Mode
Twisted-Pair RJ-45 Connector
Transceiver Module.
AE379-63001 HP 4GB Sw Fc Sfp Transceiver 4 Pack.
The Cisco 10GBASE Dense Wavelength-Division Multiplexing (DWDM) SFP+ modules allow enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.
0231A0LT HP X130 10g XFP Lc Sr Transceiver.
The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM optics provide both transmit and receive optical interfaces in a single SFP footprint pluggable into any of the four ASAP 4-PIO slots. Each port interface operates at the standard SONET/SDH (Telcordia GR-253-CORE, ITU G.703 and ITU-T G.694.1) 2488.32-Mbps bit rate. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP uses a duplex LC connector on the SFP faceplate that is routed through a fiber tray on to the cable-routing module for termination. The Cisco ONS 2.5-Gbps fixed-rate DWDM SFP carries both concatenated payloads of STS-3c/VC-4, STS-6c/VC-4-2c, STS-9c/VC-4-3c, STS-12c/VC-4-4c, STS-24c/VC-4-8c, and STS-48c/VC-4-16c and nonconcatenated payloads on an STS-1 basis. In SONET mode, each optical port can be provisioned as STM-16 to enable the tunneling of SDH payloads in the form of STS-Nc concatenated payload over a SONET network. This helps enable North American service providers to transport SDH traffic from international cable landing points to customer sites. When operated within the outlined specifications (refer to Table 5), each port interface transports a 2.5-Gbps signal with a minimum BER of 10E-12. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP provides 32 wavelengths in the ITU-T G.694.1 C-Band channel plan.
Cisco 8-Gbps Fibre Channel SFP+ modules provide Fibre Channel connectivity for the 2/4/8 Gbps ports on the MDS 9000 Family platform. Three types are available: the Cisco Fibre Channel Shortwave SFP+ (part number DS-SFP-FC8G-SW), the Cisco Fibre Channel Longwave SFP+ (part number DS-SFP-FC8G-LW), and the Cisco Fibre Channel Extended Reach SFP+ (part number DS-SFP-FC8G-ER). Each offers 2/4/8-Gbps autosensing Fibre Channel connectivity.
J4834A HP ProCurve 100/1000BaseTX Transceiver Module.
SFP+ transceiver module
10 GigE
10GBase-SR
up to 1310 ft
for Cisco Meraki MX100
MX400
MX600
MX80; Cloud Managed Ethernet Aggregation Switch MS420
FET-10G= Cisco Fabric Extender Transceiver Sfp (Mini-Gbic) Transceiver Module – Plug-In Module.
SFP (mini-GBIC) transceiver module
GigE
1000Base-T
0231A0LR HP X120 Sfp Mini-Gbic Transceiver Module 1000base-T Rj-45 Plug-In Module.
0231A72X- HP X135 – XFP Transceiver Module – 10GBase-Er – Lc – Plug-In Module.
J4858CR HP ProCurve X121 1Gbps 1000Base-SX Multi-Mode Fibre 550m 850nm Duplex LC Connector SFP (Mini-GBIC) Transceiver Module.
Get access to your Orders, Wishlist and Recommendations.
Shopping cart is empty!
![]()


There are no reviews yet.