AFCT-57F5NPZ-HP1 Technical Specifications
HP B-Series 16GB Lw 25km Fc SFP 1-Pack Transceiver
Brand HP
HP Transceiver
AFCT-57F5NPZ-HP1
Type SFP
HP B-Series 16GB Lw 25km Fc SFP 1-Pack Transceiver.
AFCT-57F5NPZ-HP1 HP B-Series 16GB Lw 25km Fc SFP 1-Pack Transceiver.
Brand HP
HP Transceiver
AFCT-57F5NPZ-HP1
Type SFP
HP B-Series 16GB Lw 25km Fc SFP 1-Pack Transceiver.
The Cisco 10GBase Dense Wavelength-Division Multiplexing (DWDM) SFP+ module allows enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.
The Cisco 10GBASE Dense Wavelength-Division Multiplexing (DWDM) SFP+ module allow enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.
J9142A HP ProCurve X112 1Gbps 1000Base-BX-D Single-mode Fiber 20km 1490nmTx/1310nmRx LC Connector SFP Transceiver Module
The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network . SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
0231A0LG HP 10GB Sfp+ Lc Sr Transceiver.
Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility.
The Cisco 10GBASE Dense Wavelength-Division Multiplexing (DWDM) SFP+ modules allow enterprises and service providers to provide scalable and easy-to-deploy 10-Gigabit LAN, WAN, and optical transport network (OTN) services in their networks.
The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM optics provide both transmit and receive optical interfaces in a single SFP footprint pluggable into any of the four ASAP 4-PIO slots. Each port interface operates at the standard SONET/SDH (Telcordia GR-253-CORE, ITU G.703 and ITU-T G.694.1) 2488.32-Mbps bit rate. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP uses a duplex LC connector on the SFP faceplate that is routed through a fiber tray on to the cable-routing module for termination. The Cisco ONS 2.5-Gbps fixed-rate DWDM SFP carries both concatenated payloads of STS-3c/VC-4, STS-6c/VC-4-2c, STS-9c/VC-4-3c, STS-12c/VC-4-4c, STS-24c/VC-4-8c, and STS-48c/VC-4-16c and nonconcatenated payloads on an STS-1 basis. In SONET mode, each optical port can be provisioned as STM-16 to enable the tunneling of SDH payloads in the form of STS-Nc concatenated payload over a SONET network. This helps enable North American service providers to transport SDH traffic from international cable landing points to customer sites. When operated within the outlined specifications (refer to Table 5), each port interface transports a 2.5-Gbps signal with a minimum BER of 10E-12. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP provides 32 wavelengths in the ITU-T G.694.1 C-Band channel plan.
Cisco 8-Gbps Fibre Channel SFP+ modules provide Fibre Channel connectivity for the 2/4/8 Gbps ports on the MDS 9000 Family platform. Three types are available: the Cisco Fibre Channel Shortwave SFP+ (part number DS-SFP-FC8G-SW), the Cisco Fibre Channel Longwave SFP+ (part number DS-SFP-FC8G-LW), and the Cisco Fibre Channel Extended Reach SFP+ (part number DS-SFP-FC8G-ER). Each offers 2/4/8-Gbps autosensing Fibre Channel connectivity.
0231A0LR HP X120 Sfp Mini-Gbic Transceiver Module 1000base-T Rj-45 Plug-In Module.
0231A0LQ HP X120 1GB Sfp Lc Sx Transceiver.
AG870A HP – MDS 9000 10GB Fibre Channel X2 Copper Transceiver.
Get access to your Orders, Wishlist and Recommendations.
Shopping cart is empty!
![]()


There are no reviews yet.