SFP-1GE-TX Technical Specifications
Juniper Small Form Factor Pluggable 1000base
SFP-1GE-TX Juniper Small Form Factor Pluggable 1000base
Ethernet Technology: Gigabit Ethernet
Device Type : Sfp (Mini-Gbic) Transceiver Module
$0
SFP-1GE-TX Juniper Small Form Factor Pluggable 1000base


SFP-1GE-TX Juniper Small Form Factor Pluggable 1000base
Ethernet Technology: Gigabit Ethernet
Device Type : Sfp (Mini-Gbic) Transceiver Module
SFP-GE-T is a Cisco compatible 1000Base SFP Transceiver. SFP-GE-T arrives programmed from the factory with the exact same configuration data as its Cisco OEM equivalent, which allows for seamless network integration. This SFP transceiver performs identically to Cisco original transceivers and is 100% compatible with other OEM and third party transceivers.
453154-B21 HPE Blade System 1000BASE-T SFP Copper RJ-45 100m Transceiver Module.
GLC-LH-SMD is the 1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
EX-SFP-GE10KT15R13 Juniper SFP 1000BASE-BX, Tx 1550nm/Rx 1310nm For 10km Transmission On Single-strand, Single-mode Fiber.
J4859A HP SFP Gigabit Ethernet 1000Base-LX Transceiver Module.
CONNECTIVITY TECHNOLOGY : WIRED
CABLING TYPE : 1000BASE-SX
DATA LINK PROTOCOL : GIGE
DATA TRANSFER RATE : 1 GBPS
MAX TRANSFER DISTANCE : 1640 FT
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. GLC-EX-SMD is 1000BASE-EX long-wavelength; with DOM.
The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.
Cisco GLC-T is a 1000BASE-T SFP for Copper Networks. The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m (328 ft) link length. Cisco 1000BASE-T SFP modules support 10/100/1000 autonegotiation and Auto MDI/MDIX. This SFP needs RJ-45 connector (1000BASE-T).
HPE JD118B is a HP X120 1G SFP LC SX Transceiver. It’s a small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.
The Cisco 1000BASE-T Gigabit Interface Converter (GBIC) is an ideal solution for Catalyst ® 6500, 4000, 3550, 2950, 3500 XL and 2900 XL Series switch customers, providing full duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructures. This GBIC technology leverages the industry’s flexible, standards-based 1000BASE-X design, allowing for a simple and low-cost migration path to Gigabit Ethernet. There are two key product applications for the Cisco 1000BASE-T GBIC: connectivity to high-end workstations and distribution and wiring closet interconnectivity.
Cisco GLC-TE is a 1000BASE-T SFP for Copper Networks. The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of up to 100m (328 ft) link length. Cisco 1000BASE-T SFP modules support 1Gbps. This SFP needs RJ-45 connector (1000BASE-T).
Get access to your Orders, Wishlist and Recommendations.
Shopping cart is empty!
![]()


There are no reviews yet.